General
Coverage Area Size: 20 x 20 ft (6.1 x 6.1 m)
Coverage Type: Single-zone automatic
Power Requirements: Power over Ethernet Plus (PoE+), Class 4
Power Consumption: 24 W maximum
Control Software: Designer
Cable Requirements: Cat5e or higher (shielded cable recommended)
Connector Type: RJ45
Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F)
Storage Temperature Range: −29°C (−20°F) to 74°C (165°F)
Microphone
Frequency Response: 125 Hz to 20 kHz
AES67 or Dante Digital Output
Channel Count
|
1 output channel
|
Sampling Rate
|
48 kHz
|
Bit Depth
|
24
|
Sensitivity at 1 kHz: −1.74 dBFS/Pa
Maximum SPL (Relative to 0 dBFS overload): 95.74 dB SPL
Signal-to-Noise Ratio (Ref. 94 dB SPL at 1 kHz): 75.76 dB A-weighted
Latency (Does not include Dante latency): 26.6 ms
Self Noise: 18.24 dB SPL-A
Dynamic Range: 77.5 dB
Digital Signal Processing: Automatic mixing, acoustic echo cancellation (AEC), noise reduction, automatic gain control, compressor, delay, equalizer (4-band parametric), mute, gain (140 dB range)
Acoustic Echo Cancellation Tail Length: Up to 250 ms
Loudspeaker
AES67 or Dante Digital Input
Channel Count
|
2 input channels
|
Frequency Range (−10 dB): 120 Hz to 20 kHz
Maximum Output Level
At 1 meter
Pink noise
|
86 dB SPL
|
1 kHz sine tone
|
88 dB SPL
|
Coverage Angle (Average of 1 octave band centered on 4 kHz):80°
Digital Signal Processing: Delay, compressor, signal generator, equalizer (4-band parametric)
Latency (Not including Dante latency): 6.3 ms
Dimensions
MXA902-S:
-
A (Flange): 0.41 in. (10.5 mm)
-
B (Edge to edge): 23.77 in. (603.8 mm)
-
C (Height): 2.2 in. (56.04 mm)
MXA902-S-60CM: