| MODEL |
Behringer Eurocom MA4008 |
| Inputs |
|
| Type |
Mic/Line Inputs 1 & 2: 2 x XLR / 1/4" TRS combo Jacks
2 x 4-pin Euroblock in parallel
Mic/Line Inputs 3 & 4: 2 x XLR / 1/4" TRS combo jacks
2 x 3-pin Euroblock in parallel
Mic/Line Inputs 5-8: 4 x 3-Pin Euroblock, electronically balanced
Auxiliary: 4 x RCA stereo summed
Telephone/Page: 1 x 4-pin Euroblock
Power amp input: 1 dual RCA Jack
|
| Input Impedance |
Mic Inputs 1-8: -50 to 0 dBV at 600 Ω, electronically balanced
Line Inputs 1-8: -27 to 0 dBV at 600 Ω, electronically balanced
Auxiliary: -10 dBV, 10 kΩ, unbalanced
Tel/Page Input:
Mic: -50 to 0 dBV at 600 Ω
Line: -27 to 0 dBV at 600 Ω
Power Amp Input: 0 dBV, 600 Ω, unbalanced
|
| Phantom Power |
Inputs 1-8 and Telephone/Page: 24 VDC, switchable
|
| Audio Output |
|
| Type |
Amplifier output: 1 x 4-pin female Euroblock
LO-Z: 2 terminals @ 4 Ω
HI-Z: 2 terminals @ 70 V/100 V, switchable
Output regulation: <2 dB, no load to full load
Preamp output: 1 x dual RCA jack
Z2/Mono output: 1 x dual RCA jack
Record output: 1 x dual RCA jack
|
| Output Impedance |
Preamp output: 0 dBV, 600 Ω, unbalanced
Z2/Mon output: 0 dBV, 600 Ω, unbalanced
Record output: 0 dBV, 600 Ω, unbalanced
|
| Amplifier |
|
| Channels |
LO-Z: 1 x 4 Ω, minimum
HI-Z: 1 x 70/100 V, switchable
|
| Power Output |
LO-Z 1% THD, 1 kHZ sine wave: 80 W RMS at 8 Ω
160 W RMS @ 4 Ω
HI-Z 1% THD, 1 kHz sine wave: 80 W RMS at 70 V
80 W RMS at 100 V
|
| Minimum Load Impedance |
LO-Z 1% THD, 1 kHZ sine wave: 4 Ω
HI-Z 1% THD, 1 kHz sine wave: 62 Ω at 70 V
125 Ω at 100 V
|
| Control Connectors |
|
| Control Connectors |
Remote: 1 x 5-pin Euroblock connector
Tel/Page: 1 x 4-pin Euroblock, 1 terminal
Inputs 1 & 2: 2 x 4-pin Euroblock, 1 terminal each
|
| Volume |
Remote: 10 kΩ linear-taper potentiometer
|
| Power |
Remote: +5 VDC, 100 mA
|
| DC Power Requirements |
Remote: +5 VDC, 100 mA
Current limited, short circuit protected
|
| Mute |
Remote: NO-voltage make contact input; open voltage 5 VDC
Short circuit: <10 mA
Tel/Page: 1 x 4-pin Euroblock, 1 terminal
Inputs 1 & 2: No-voltage make contact input, open voltage 24 VDC
Short circuit: <10 mA
|
| System Information |
|
| Dynamic Range |
Mic: 65 dB
Line: 80 dB
|
| Distortion (THD) |
0.5% of rated power at 1 kHz
|
| Frequency Response |
50 to 18,000 Hz ±2 dB
|
| Tone Controls |
Low: ± 12 dB at 100 HZ
High: ± 12 dB at 10 kHz
|
| Indicators |
Power: LED ring illumination (yellow)
Overload/protection: LED ring illumination (red)
Output Level: LED VU output meter (yellow and red while clipping)
|
| Power Supply |
|
| Mains |
Voltage: Switchable 115 or 230 VAC at 50/60 Hz Connector: Standard IEC receptacle
|
| Fuse |
T 5 AH 250 V / T 2.5 AH 250 V
|
| Power Efficiency |
68% (max)
|
| Power Consumption |
Idle: 52 W
1/8 power: 70 W
1/3 power: 113 W
Full power: 234 W
|
| General |
|
| Dimensions |
3.5 x 17 x 16" (88 x 432 x 406 mm)
|
| Weight |
10.2 lb (4.6 kg)
|
| Package Weight |
16.1 lb
|
| Box Dimensions (LxWxH) |
22.7 x 16.9 x 7.3"
|
/Hinhsp/onkyo-tx-rz830-300x225.jpg "ONKYO TX-RZ830")