SHURE AD600

RF Tuning Frequency Range: 174 - 2000 MHz

RF Tuning Step Size: 25 kHz / 200kHz

Noise Floor (Resolution Bandwidth)

Image Rejection: > 90 dB

Spurious Response: < -100 dBm, typical

Dimensions: 43.2 x 482.6 x 285.7 mm (1.7 x 19.0 x 11.25 inches), H x W x D

Weight: 3.7 kg (8.15 lbs)

Housing: Steel

Power Requirements: 110 - 240 V AC, 50 - 60 Hz

Current Drain: 1.2 A

Operating Temperature Range: -18°C - 50°C (0°F - 122°F)

Storage Temperature Range: -29°C - 74°C (-20°F - 165°F)

RF Input

Connector Type: BNC

Impedance: 50 Ω

Maximum Input Level: +10 dBm

Bias Voltage: 12 - 13.5 V DC (150 mA maximum per antenna, 450 mA maximum per device)

Headphone Monitor Audio Output

Audio Frequency Response: 20 Hz - 20 kHz, +/- 3 dB

Configuration: ¼" / 6.3 mm connector, unbalanced stereo

Impedance: 63 Ω

Maximum Signal Level: 350 mW

Pin Assignments: Tip: Audio + , Left: | , Ring: Audio + , Right: | , Sleeve: Ground

Networking

Network Interface: Quad Port Ethernet 10/100/1000 Mbps

Redundant Dante support

PoE supported on the control ports

Network Addressing Capability: DHCP or Manual IP address

DC Module Specifications

DC Input Voltage Range: 10.9 - 16V

Maximum DC Input Current: 5.5 A

Protection Modes: Reverse Polarity, Over Voltage

Connector Type: 4-pin XLR (male)