GENERAL
All specifications measured from narrow lobe width. Values for all widths are within ± 3 dB of these specifi cations unless otherwise noted.
Lobe Width (adjustable): Narrow 30 degrees, Medium 40 degrees, Wide 70 degrees
Connector Type: RJ45
Power Requirements: Power over Ethernet (PoE), Class 0
Power Consumption: 10 W maximum
Control Software: Shure Designer
Plenum Rating: UL2043 (Suitable for Air Handling Spaces)
Dust Protection: IEC 60529 IP5X Dust Protected
WEIGHT:
MXA710-2FT |
2 lbs (0.91 kg) |
MXA710-4FT |
3.7 lbs (1.67 kg) |
PRODUCT DIMENSIONS:
MXA710-2FT |
0.87 x 2.36 x 25.04 in. (22.09 x 60 x 636 mm) H x W x L |
MXA710-4FT |
0.87 x 2.36 x 49.12 in. (22.09 x 60 x 1247.76 mm) H x W x L |
Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F)
Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)
AUDIO
Frequency Response: 100 Hz to 20 kHz
AES67 or Dante Digital Output
Channel Count |
MXA710-2FT |
6 total channels (4 independent transmit channels, 1 Automix output, 1 AEC reference in channel) |
MXA710-4FT |
10 total channels (8 independent transmit channels, 1 Automix output, 1 AEC reference in channel) |
Sampling Rate |
48 kHz |
Bit Depth |
24 |
Sensitivity at 1 kHz:
MXA710-2FT |
-7.4 dBFS/Pa |
MXA710-4FT |
-7.9 dBFS/Pa |
Maximum SPL Relative to 0 dBFS overload:
MXA710-2FT |
101.4 dB SPL |
MXA710-4FT |
101.9 dB SPL |
Signal-To-Noise Ratio (Ref. 94 dB SPL at 1 kHz): 71.2 dB A-weighted
Latency (Does not include Dante latency)
Direct Outputs |
8.7 ms |
Automix output (Includes IntelliMix processing) |
19.3 ms |
Self Noise:
MXA710-2FT |
22.9 dB SPL-A |
MXA710-4FT |
22.8 dB SPL-A |
Dynamic Range:
MXA710-2FT |
78.5 dB |
MXA710-4FT |
79.1 dB |
Built-in Digital Signal Processing: Automatic mixing, Acoustic Echo Cancellation (AEC), Noise Reduction, Automatic Gain Control, Compressor, Delay, Equalizer (4-band Parametric), Mute, Gain (140 dB range)