Behringer Eurocom SN2408

Behringer Eurocom SN2408

80-Watt Mixer and Dual Amplifier
The Eurocom SN2408 80-Watt Mixer and Dual Amplifier from Behringer is designed for continuous operation in distributed music, paging, and AV applications in bars, recreation facilities, conference rooms, hotels, and other venues. It is powered by two independent Class-D mono amplifiers with DC and thermal overload protection. The first amplifier has a high impedance output and can be set to either 70 or 100 volts. The second amplifier has a standard low-impedance output.
Brand:
Product Code:SN2408
The SN2408 features a variety of inputs including three mic/line combination XLR/TRS inputs as well as three mic/line four-pin Euroblock connectors, all with assignable phantom power. The unit also features dual stereo summed RCA auxiliary inputs for playback from external sources and a 3-pin Euroblock input for telephone or paging purposes. It features a 4-pin Euroblock main output as well as a 3-pin Euroblock Zone 2 output with assignable inputs. Rear-panel DIP switches allow you to route individual sources to the Zone 2 output.
 
Front Panel Controls
The front-panel features input gain control knobs for all five inputs as well as high and low EQ knobs, and a master volume knob. The master volume knob is surrounded by indicator ring that displays power and clipping
 
Voice-Activated Music Muting
Paging functions are automated so that user action is not required to duck background audio during pages
 
Processing Loops
The SN2408 has dual RCA effect send and receive inputs and outputs for use with external processing devices such as dynamics or EQ
MODEL Behringer Eurocom SN2408
Inputs
Microphone Inputs:
3x Combo XLR/TRS jacks
3x 4-pin Euroblock connectors

Auxiliary Inputs:
2x Stereo RCA (summed)

Telephone/Page Input:
1x 3-pin Euroblock connector

Amp Inputs:
2x RCA
Outputs
Zone 1 Speaker Output:
1x 4-pin Euroblock connector (LO-Z and HI-Z)

Zone 2 Line Level Output:
1x 3-pin Euroblock connector

Preamp Outputs:
2x RCA
Input Impedance
Microphone Combo XLR/TRS Inputs: -50 dBv @ 600 Ω (balanced)

 

Euroblock Inputs: 0 dBv @ 10 k Ω (balanced)

Auxiliary Inputs: 0 dB @ 10 kΩ (unbalanced)

Telephone/Page Input: -10 dBv @ 600 Ω (balanced)

Output Impedance
4 dBV @ 600 Ω balanced
Phantom Power
24 VDC
Amplifier
Channels:
LO-Z: 1x 4 Ω (minimum)
HI-Z: 1x 70/100 V (switchable)

Power Output LO-Z:
80 W RMS @ 8 Ω, 1 % THD, 1 kHz sine wave, minimum 4 Ω

Power Output HI-Z:
80 W RMS @ 70 V (minimum 62.5 Ω)
160 W RMS @ 100 V (minimum 62.5 Ω, 1 % THD @ 1 kHz sine wave)
Controls
3x Mic/Line gain (inputs 1 to 5)
1x Lo Tone knob ± 15 dB @ 100 Hz
1x Hi Tone knob ± 15 dB @ 10 kHz
1x Master Volume knob
1x Telephone/Page Level knob
1x Zone 2 Send Level knob
1x Mute Depth knob
1x Power On/Off switch
1x Voltage 115/230 VAC switch
1x HI-Z Mode 70/100 V switch
3x Phantom/Mic/Line 3 position DIP switch
1x Mute Assign 8-position DIP switch
1x Output Assign 8-position switch
Indicators
1x Dual-function indicator ring (yellow - power on; red - clip)
Circuit
Type: 2x Transformerless Class D
Dual Output: LO-Z & HI-Z
Protection
Amplifier: Thermal and DC protection, automatic limiters
Frequency Response
50 Hz to 218 kHz (± 1 dB @ 1 W, 70 / 100 V)
Dynamic Range
Mic: 65 dB
Auxiliary: 80 dB
Telephone/Page: 78 dB
Total Harmonic Distortion/Noise
0.05 % @ 1 W (1 kHz dBr into 8 Ω load)
Signal to Noise Ratio
90 dB @ 1% THD+N
Power Supply
Mains Voltage: 100 to 120 VAC (switchable), 220 to 240 VAC, 50/60 Hz
Fuse: T 6.3 A H 250 V
Power Efficiency: 70%
Power Consumption: 80 W @ 1/8 of maximum rated output
Mains Connector: Standard IEC receptacle
Dimensions
3.3 x 12.0 x 14.2" (8.3 x 30.5 x 36.0 cm)
Weight
9.2 lb (4.2 kg)