SHURE MXN-AMP
Bộ khuếch đại đa kênh PoE+
Bộ khuếch đại PoE+ đa kênh được thiết kế để tái tạo âm thanh chương trình và giọng nói trong phòng họp. Ampli Microflex® Conferencing được thiết kế dành riêng cho hội nghị với âm thanh rõ ràng, dễ hiểu. Khi sử dụng với các micro hội nghị của Shure Microflex Ecosystem, DSP và loa, chúng mang lại âm thanh tràn ngập căn phòng, mã hóa âm thanh đầu cuối an toàn, lắp đặt nhanh chóng và dễ dàng trong nhiều loại phòng, và sự tương thích và hiệu quả tuyệt vời khi cả giải pháp đến từ một nhà sản xuất duy nhất.
Đã xem715 lần
Tin liên quan
Power Input
Power over Ethernet (PoE) or PoE+ over RJ45 (48 V = 25.5 W MAX)
Weight
2.43 Ibs (1.1kg)
Product Dimensions
7.95 x 7.01 x 1.57 in. (202 x 178 x 40 mm) L x W x H
Amplifier Class
D
Audio Inputs
4 Dante in, 1 3.5 mm TRS connector with two audio line level inputs
Control Input
1 logic in
Audio Outputs
4 Dante output channels, 4 LoZ loudspeaker outputs, 1 70V loudspeaker output
Frequency Response
20 Hz to 20 kHz
Sample Rate
48 kHz
Bit Depth
24
Latency
Analog to analog
2.2 ms typical, 2.5 ms max (add 1 ms for Dante)
Signal-To-Noise Ratio
110 dB max
Output Level/Total Harmonic Distortion (THD)
at 1 kHz
THD less than 0.05% (0.01% typical)
Power Consumption
PoE 12.95 W max
PoE+ 25.5 W max
Power Requirements
PoE (Class 0) or PoE+ (Class 4)
Output Power per Channel
LoZ Mode 3.25W
70V Mode 11.7W
Operating Temperature Range
-7 to 40°C (19.4 to 104°F)
Storage Temperature Range
-29 to 74°C (-20 to 165°F)
Plenum Rating
Suitable for use in air plenums per NEC section 300.22(c) and/or IMC section 602.
Cable Requirements
Cat 5e or higher (shielded cable recommended)
Block Connector Type
Logic Input 3-pin connector, 0.2 in. (5.08mm) pitch, Dinkle 2ESDV-03P
LoZ Output 2-pin connector, 0.2 in. (5.08mm) pitch, Dinkle 2ESDV-02P
70V Output 2-pin connector, 0.295 in. (7.5mm) pitch, Dinkle 7ESDV-02P
Control Software
Shure Designer
Power over Ethernet (PoE) or PoE+ over RJ45 (48 V = 25.5 W MAX)
Weight
2.43 Ibs (1.1kg)
Product Dimensions
7.95 x 7.01 x 1.57 in. (202 x 178 x 40 mm) L x W x H
Amplifier Class
D
Audio Inputs
4 Dante in, 1 3.5 mm TRS connector with two audio line level inputs
Control Input
1 logic in
Audio Outputs
4 Dante output channels, 4 LoZ loudspeaker outputs, 1 70V loudspeaker output
Frequency Response
20 Hz to 20 kHz
Sample Rate
48 kHz
Bit Depth
24
Latency
Analog to analog
2.2 ms typical, 2.5 ms max (add 1 ms for Dante)
Signal-To-Noise Ratio
110 dB max
Output Level/Total Harmonic Distortion (THD)
at 1 kHz
THD less than 0.05% (0.01% typical)
Power Consumption
PoE 12.95 W max
PoE+ 25.5 W max
Power Requirements
PoE (Class 0) or PoE+ (Class 4)
Output Power per Channel
LoZ Mode 3.25W
70V Mode 11.7W
Operating Temperature Range
-7 to 40°C (19.4 to 104°F)
Storage Temperature Range
-29 to 74°C (-20 to 165°F)
Plenum Rating
Suitable for use in air plenums per NEC section 300.22(c) and/or IMC section 602.
Cable Requirements
Cat 5e or higher (shielded cable recommended)
Block Connector Type
Logic Input 3-pin connector, 0.2 in. (5.08mm) pitch, Dinkle 2ESDV-03P
LoZ Output 2-pin connector, 0.2 in. (5.08mm) pitch, Dinkle 2ESDV-02P
70V Output 2-pin connector, 0.295 in. (7.5mm) pitch, Dinkle 7ESDV-02P
Control Software
Shure Designer
- 1 Microflex® MXN-AMP PoE Powered Amplifier
- 1 Logic input block connector
- 4 LoZ output block connectors
- 1 70V output connector
- 2 1/4” screws, #4-40 UNC thread