SHURE MXN-AMP

Power Input
Power over Ethernet (PoE) or PoE+ over RJ45 (48 V = 25.5 W MAX)

Weight
2.43 Ibs (1.1kg)

Product Dimensions
7.95 x 7.01 x 1.57 in. (202 x 178 x 40 mm) L x W x H

Amplifier Class
D

Audio Inputs
4 Dante in, 1 3.5 mm TRS connector with two audio line level inputs

Control Input
1 logic in

Audio Outputs
4 Dante output channels, 4 LoZ loudspeaker outputs, 1 70V loudspeaker output

Frequency Response
20 Hz to 20 kHz

Sample Rate
48 kHz

Bit Depth
24

Latency
Analog to analog

2.2 ms typical, 2.5 ms max (add 1 ms for Dante)

Signal-To-Noise Ratio
110 dB max

Output Level/Total Harmonic Distortion (THD)
at 1 kHz

THD less than 0.05% (0.01% typical)

Power Consumption
PoE    12.95 W max
PoE+    25.5 W max
Power Requirements
PoE (Class 0) or PoE+ (Class 4)

Output Power per Channel
LoZ Mode    3.25W
70V Mode    11.7W
Operating Temperature Range
-7 to 40°C (19.4 to 104°F)

Storage Temperature Range
-29 to 74°C (-20 to 165°F)

Plenum Rating
Suitable for use in air plenums per NEC section 300.22(c) and/or IMC section 602.

Cable Requirements
Cat 5e or higher (shielded cable recommended)

Block Connector Type
Logic Input    3-pin connector, 0.2 in. (5.08mm) pitch, Dinkle 2ESDV-03P
LoZ Output    2-pin connector, 0.2 in. (5.08mm) pitch, Dinkle 2ESDV-02P
70V Output    2-pin connector, 0.295 in. (7.5mm) pitch, Dinkle 7ESDV-02P
Control Software
Shure Designer

• 1 Microflex® MXN-AMP PoE Powered Amplifier
• 1 Logic input block connector
• 4 LoZ output block connectors
• 1 70V output connector
• 2 1/4” screws, #4-40 UNC thread