SHURE SBRC

SHURE SBRC

Accommodates up to 8 Shure rechargeable bodypack and handheld transmitter batteries in a single rack space. Compatible with Shure rechargeable batteries SB910, SB920, SB910M, AXT910, AXT920 and SB900B. Charging modules sold separately.
Hãng sản xuất:
Mã sản phẩm:SBRC

The Shure Battery Rack Charger (SBRC) provides a seamless, touring-ready battery charging and storage solution.

Interchangeable charging modules support a variety of Shure Lithium-ion batteries, accommodating up to 8 batteries in a single rack space.

An easy-to-read front panel displays critical parameters including charge levels, time-to-full, and battery health indicators such as temperature and cycle count. Shure Wireless Workbench®  software provides remote monitoring of battery status when SBRC is connected to a network.

Control and Insight

  • Comprehensive status display with straightforward three-button interface control
  • Easily visible charge status by percentage and time-to-full readings in hours and minutes
  • Battery health tracking metrics indicate percentage of original capacity and cycle count
  • Remote monitoring of battery status available through Shure Wireless Workbench software

Versatility

  • Interchangeable charging modules allow users to mix and match up to 8 Shure bodypack and handheld transmitter batteries
  • Charges batteries to 50 percent capacity within an hour and full capacity within 3 hours
  • Storage mode prepares batteries for optimal long-term storage
  • Charges Shure SB900B, AXT910 and AXT920 rechargeable batteries

Battery Type

Up to 8 rechargeable Li-Ion batteries

Charge Time

50%=1 hour; 100%=3 hours

Charging Module Type

Up to 4 charging modulesin any combination

Operating Temperature Range

-18°C (0°F) to 63°C (145°F)

Battery Charging Temperature Range

0°C (32°F) to 60°C (140°F)

Storage Temperature Range

-29°C (-20°F) to 74°C (165°F)

Dimensions

44 mm x 483 mm x 366 mm (1.7 in. x 19.0 in. x 14.4 in.), H x W x D

Weight

4.4 kg (9.8 lbs), without batteries or charging modules

Housing

Steel; Extruded aluminum

Power Requirements

Input 100 to 240 V AC, 50-60 Hz
Output 4.5 V DC maximum, 60 W maximum

Current Drain

1.8 A

RMS (referenced at 90 V AC)

Networking

Network Interface

Ethernet 10/100 Mbps

Network Addressing Capability

DHCP or Manual IP address