SHURE SLXD14D

SYSTEM

RF

• RF Carrier Frequency Range: 470–937.5 MHz, varies by region (See Frequency Range and Output Power table)
• Working Range: 100 m ( 328 ft)
• RF Tuning Step Size: 25 kHz, varies by region
• Image Rejection: >70 dB, typical
• RF Sensitivity: −97 dBm at 10^-5 BER

AUDIO

• Latency: 3.2 ms
• High-Pass / Low Cut Filter: 150 Hz @ -12 db/oct
• Audio Frequency Response: 20 Hz– 20 kHz (+1, -2 dB)
• Audio Dynamic Range: 118 dB at 1% THD, A-weighted, typical
• Total Harmonic Distortion: <0.02%
• System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (with respect to the ring of the 6.35 mm output) output.
• Mic Offset Range: 0 to 21 dB (in 3 dB steps)

TEMPERATURE RANGE

• Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
• Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)

SLXD1

SLXD4 / SLXD4D

• Dimensions

• Weight

• Housing: Galvanized Steel
• Power Requirements: 15 V DC @ 600 mA, supplied by external power supply (tip positive)
   

RF INPUT

• Spurious Rejection: >75 dB, typical
• Connector Type: BNC
• Impedance: 50 Ω
• Phantom Power Protection:

AUDIO OUTPUT

• Gain Adjustment Range: -18 to +42 dB (in 1 dB steps)
• Configuration

• Impedance

• Full Scale Output

• Mic/Line Switch: 30 dB pad

NETWORKING

• Network Interface: Single Port Ethernet 10/100 Mbps
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Cable Length: 100 m (328 ft)