New

SHURE SLXD15

Name: SHURE SLXD15 - Portable Wireless System With SLXD1 Bodypack Transmitter
Brand: Shure
Availability: InStock

Portable Wireless System With SLXD1 Bodypack Transmitter

Featuring the SLXD1 Bodypack wireless transmitter, SLXD15 provides transparent digital audio and rock-solid RF stability for videography, ENG and broadcast applications.

Brand: Shure

Product Code:SLXD15

Wish List
Compare

Hard-Working Wireless, When And Where You Need It.

The SLXD15 Portable digital wireless bodypack system delivers transparent, 24-bit digital audio and rock-solid RF performance for videographers, ENG and field production, film and location sound applications. Operate up to 32 compatible systems per 44 MHz band, with easy setup and optional rechargeability accessories. The SLXD1 features a TQG connector for adding your choice of lavalier microphone. Includes SLXD1 bodypack wireless transmitter, SLXD5 single-channel portable receiver, two zippered carrying pouches and a pair of AA alkaline batteries (no lavalier included).

Powerful, portable digital wireless receiver for on-camera cold shoe mounting and audio bag use
Dual 1/8” outputs including a headphone monitor out and switchable line/mic output
Use Multi-Mic Mode to scan and sync over IR multiple clean frequencies, and monitor multiple sources from a single receiver with user-configurable front-panel controls
Bright OLED display screen for key system function readouts and remaining battery life on transmitter and receiver
Transparent 24-bit digital audio
Extended 20 Hz to 20 kHz frequency range (microphone dependent)
118 dB dynamic range
Digital predictive switching diversity
44 MHz tuning bandwidth (region dependent)
32 available channels per frequency band (region dependent)
Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
Easy pairing of transmitters and receivers over scan and IR sync
Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
Charging contacts for use with optional SBC203 docking charger
TQG connectivity offers a variety of microphone options
Rugged metal construction portable receiver design
Ergonomic, durable plastic construction bodypack transmitter

Show More Show Less

SYSTEM

RF Carrier Frequency Range: 470–937.5 MHz, varies by region (See Frequency Range and Output Power table)
Working Range: 100 m ( 328 ft)
RF Tuning Step Size: 25 kHz, varies by region
Image Rejection: >70 dB, typical
RF Sensitivity: −97 dBm at 10^-5 BER

AUDIO

Latency: 3.2 ms
High-Pass / Low Cut Filter: 150 Hz @ -12 db/oct
Audio Frequency Response: 20 Hz– 20 kHz (+1, -2 dB)
Audio Dynamic Range: 118 dB at 1% THD, A-weighted, typical
Total Harmonic Distortion: <0.02%
System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (with respect to the ring of the 6.35 mm output) output.
Mic Offset Range: 0 to 21 dB (in 3 dB steps)

TEMPERATURE RANGE

Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)

SLXD1

Battery Type: Rechargeable Li-Ion or 1.5 V AA batteries
Dimensions (H × W × D): 3.86 × 2.68 × 1.0 in (98 × 68 × 25.5 mm)
Weight: 3.1 oz (89 g)
Housing: PC/ABS

AUDIO INPUT

Connector: 4-Pin male mini connector (TA4M)
Configuration: Unbalanced
Impedance: 1 MΩ
Maximum Input Level: 8.2 dBV
Preamplifier Equivalent Input Noise (EIN): –118 dBV

RF OUTPUT

Antenna Type: 1/4 Wave
Occupied Bandwidth: <200 kHz
Modulation Type: Shure Propietary Digital
Power: 1 mW/10 mW

SLXD5 Bodypack Receiver

Dimensions

107 × 68 × 25.3 mm (4.21 × x 2.68 x 1 in.), H×W×D

Weight

182 g

Housing

Aluminum

Power Requirements

Battery	Rechargeable Li-Ion, or 1.5 V AA batteries (2)
Power Supply	SBC-DC-903 Battery Eliminator, or 5V DC via USB-C

RF Input

Spurious Rejection

>75 dB, typical

Impedance

50 Ω

Phantom Power Protection

Yes

Antenna Type

¼ wave whip

Audio Output

Audio Frequency Response

20 Hz– 20 kHz (+1, -3 dB)

Connector Type

⅛" (3.5 mm), x2

Configuration

Balanced	Tip = audio +, Ring = audio -, Sleeve = ground
Stereo	Tip = left, Ring = right, Sleeve = ground

See drawing for details

Impedance (Camera)

Balanced Line	450 Ω
Balanced Mic	240 Ω
Stereo Line	400 Ω
Stereo Mic	200 Ω

Full Scale Output

Camera (balanced line)	15 dBV
Headphone	13mW @ 64 Ω load

User Guide & Specs

SLX-D User Guide en (en)

Spec Sheet

SLX-D Spec Sheet en (en)

1 SLXD1 Digital Wireless Bodypack Transmitter
1 SLXD5 Single-Channel Portable Digital Wireless Receiver
2 Zippered Carrying Pouches
1 WA311 Non-Conductive Cold Shoe Mount Adapter
4 AA Alkaline Batteries