The ULXD1 is a wireless bodypack transmitter compatible with ULX-D Digital Wireless Systems. With a rugged yet lightweight aluminum case, the ULXD1 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options for professional sound reinforcement applications.
FEATURES
- AES 256-bit encryption for applications for which secure transmission is needed
- Proprietary Shure Gain Ranging optimizes the system’s dynamic range for any input source, eliminating the need for transmitter gain adjustments
- Optional Shure SB900B lithium-ion rechargeable battery provides over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect
- External charging contacts for docked charging (with the SBC200 and SBC220 Dual Docking Charger)
- Backlit LCD with easy to navigate menu and controls
- Rugged metal construction
- Detachable ¼ wave antenna
- Frequency and power lockout
- Applications: Vocals, Other Instruments
- Environment: Conference Room, Corporate Presentation, Auditorium, Lecture Hall, Live Performance, Place of worship, Rehearsal Space, Stadium, Theater Stage
ULX-D System Specifications
- RF Carrier Frequency Range: 470–932 MHz, varies by region (See Frequency Range and Output Power table)
- Working Range: 100 m ( 330 ft)
Note: Actual range depends on RF signal absorption, reflection and interference.Note: Actual range depends on RF signal absorption, reflection and interference.
- RF Tuning Step Size: 25 kHz, varies by region
- Image Rejection: >70 dB, typical
- RF Sensitivity: −98 dBm at 10-5 BER
- Latency: <2.9 ms
- Audio Dynamic Range (A-weighted, typical, System Gain @ +10):
|
XLR Analog Output
|
>120 dB |
|
Dante Digital Output
|
130 dB |
- Total Harmonic Distortion (−12 dBFS input, System Gain @ +10): <0.1%
- System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
- Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
Note: Battery characteristics may limit this range.
- Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
Note: Battery characteristics may limit this range.
- Receiver Output Level (The following table describes the typical total system gain from the audio input to the receiver outputs):
Receiver Output Gain
|
Output Jack
|
System Gain (gain control = 0dB) |
|---|---|
|
1/4" TRS
|
+18 dB |
|
XLR (line setting)
|
+24 dB |
|
XLR (mic setting)
|
-6 dB* |
*This setting matches a typical wired SM58 audio signal level.
ULXD1
- Mic Offset Range: 0 to 21 dB (in 3 dB steps)
- Audio Frequency Response: 20 – 20 kHz (±1 dB)
- Battery Type: Shure SB900B Rechargeable Li-Ion or LR6 AA batteries 1.5 V
- Battery Runtime:
- Shure SB900B: >8 hours
- Akaline: 9 hours
- Akaline: 9 hours
- Dimensions: 86 mm x 66 mm x 23 mm (3.4 in. x 2.6 in. x 0.9 in.) H x W x D
- Weight: 142 g (5.0 oz.), without batteries
- Housing: Cast aluminum
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Impedance: 1 MΩ
- Maximum Input Level:
- Pad Off: 8.5 dBV ( 7.5 Vpp)
- Pad On: 20.5 dBV ( 30 Vpp)
- Pad On: 20.5 dBV ( 30 Vpp)
- Preamplifier Equivalent Input Noise (EIN): System Gain Setting ≥ +20-120 dBV, A-weighted, typical
- Connector: SMA
- Antenna Type: 1/4 wave
- Impedance: 50 Ω
- Occupied Bandwidth: <200 kHz
- Modulation Type: Shure proprietary digital
- Power: 1 mW, 10 mW, 20 mW
Architect Specifications
Command Strings
Spec Sheet
Recently viewed
/Hinhsp/mission-mx-2-300x225.jpg "MISSION MX-2")
Similar Products
Related Products
